Microseries
For applications requiring ultra-close,
center-to-center parameters, IDI has pioneered the way toward satisfying
those specifications. IDI offers the following probes for testing on or below .030 (0,76) centers:
|
Penta 0 - .010" (0,25) centers
(.015" (0,38) with receptacle).
Quad 00 - .020" (0,51) centers with receptacle
Quad 0 - .020" (0,51) centers
(.030" (0,76) with receptacle).
Tri 0 - .025" (0,64) centers
(.030" (0,76) with receptacle).
The Penta 0, Quad
0, and Tri 0 are available with wire attached or may be used
with the corresponding receptacle.
Wire Types
When using the any of the Microseries probes
without a receptacle, it is recommended that the probe be ordered
with a preattached wire. All Microseries probe assemblies use soderex
magnet wire. Soderex magnet wire is a resistance wire with a desirable
thin insulation (polyurethane base insulation enamel). It can be
stripped by one of several methods: abrasion, chemical or heat.
The Tri 0 and Quad 0 probes have a 30 gage soderex wire preattached and
the Penta 0 probe has a 36 gage soderex magnet wire. If the Microseries
probes are to be used with a receptacle, the probe should be ordered without
wire. The Tri 0 and Quad 0 receptacle have a 26 gage soderex magnet wire
preattached and the Penta 0 has a 33 gage soderex magnet wire. Standard
wire length is 36" with a 1" strip. Specialized lengths and strips
are available upon request.
|
|
