|
|
|
 |
| Semiconductor Probes and Fixturing |
With the introduction of 7 new semiconductor probes
to its product line, IDI has expanded to meet almost any semiconductor
test application requirement. This unmatched selection provides repeatable
and reliable solutions for functional test, parametric test, and
burn-in test — all which can be performed on devices with pitches
as fine as 0.5mm.
Below are recommended mounting hole sizes for each of these probes. Mounting
of each spans from a single piece socket design, with one through hole; to a
two piece socket design, with a through hole and “float” relief for compliance.
Application-specific mounting is not limited to the listed values, but should
be used as a basis for retaining the probe.
|
|
101068
- 1 piece socket • Compliant on one end only
- Probe designed to be soldered to PCB
- Mounting Hole: .028/.030 (0,72/0,75)
- Drill Size: 0,75
mm
- Device Pitch: .039 (1,00) or greater
- Signal Path Length: .230 (5,84)
|
|
 |
101150
- 2 piece socket
- Probe designed to “float” in socket
- Load board side must be preloaded
- Mounting Hole: .035/.036 (0,89/0,91)
- Drill Size: #65
- Device Pitch: .050 (1,27) or greater
- Signal Path Length: .118 (3,00)
|
|
 |
100404
- 1 piece socket
- Probe designed to be press-fit in socket
- Mounting Hole: .030/.031 (0,76/0,79)
- Drill Size: #68
- Device Pitch: .039 (1,00) or greater
- Signal Path Length: .153 (3,89)
|
|
 |
101210
- 2 piece socket • Probe designed to be captured in socket
- Load board side must be preloaded
- Mounting Hole: .009/.010 (0,22/0,26)
- Drill Size: 0,26
mm
- Counterbore: .015/.017 (0,38/0,43)
- Drill Size: 0,42
mm
- Device Pitch: .020 (0,50) or greater • Signal Path Length:
.193 (4,90)
|
|
 |
101084
- 2 piece socket
- Probe designed to “float” in socket
- Load board side must be preloaded
- Mounting Hole: .024/.025 (0,61/0,63)
- Drill Size: #72
- Device Pitch: .020 (0,51) or greater
- Signal Path Length: .205 (5,20)
|
|
 |
100929
- 2 piece socket
- Probe designed to “float” in socket
- Load board side must be preloaded
- Mounting Hole: .0315/.0325 (0,80/0,83)
- Drill Size:
#67
- Device Pitch: .039 (1,00) or greater
- Signal Path Length: .250 (6,35)
|
|
 |
100881
- 2 piece socket
- Probe designed to “float” in socket
- Load board side must be preloaded
- Mounting Hole: .0315/.0325 (0,80/0,83)
- Drill Size:
#67
- Device Pitch: .039 (1,00) or greater
- Signal Path Length: .215 (5,46)
|
|
 |
100938
- 2 piece socket
- Probe designed to be captured in socket
- Load board side must be preloaded
- Mounting Hole: .013/.014 (0,33/0,36)
- Drill Size: 0,36
mm
- Counterbore: .023/.025 (0,58/0,63)
- Drill Size: #72
- Device Pitch: .026 (0,65) or greater
- Signal Path Length: .187 (4,75)
|
|
 |
100785
- 2 piece socket
- Probe designed to be captured in socket
- Load board side must be preloaded
- Mounting Hole: .028/.030 (0,71/0,76)
- Drill Size: 0,75
mm
- Counterbore: .039/.0455 (0,99/1,03)
- Drill Size: #60
- Device Pitch: .050 (1,27) or greater
- Signal Path Length: .362 (9,19)
|
|
 |
DE-50
- 1 piece socket
- Probe designed to be held in socket by load board
- Mounting Hole: .035/.0365 (0,89/0,93)
- Drill Size:
#64
- Device Pitch: .050 (1,27) or greater
- Signal Path Length: .470 (11,94)
|
|
 |
| |
|
|
|
|
|
